309-5710 20R-2352 Machine Control Module ECM for CAT 320E 323F 336E 336F 349F Excavator

309-5710 Machine Control Module for CAT 320E, 323F, 336E and 336F excavators.

  • Interchangeability: Cross-references 309-5710, 3095710, 20R-2352, 20R2352.
  • Application: For CAT 312E–390F excavators (E and F series), 336D2, 340D2, 538–568 forestry machines and MH3295 material handler.
  • Check Your Variant: This is the machine controller, not the engine ECM — match the number on your current module label first.
  • Programmed Before Dispatch: Send your machine serial number (PIN) after checkout — we flash it to your machine before shipping.

$2,540.00

Free Express Shipping — DHL / FedEx / UPS · 3–8 business days
Dispatched in 1–3 business days · Tracking within 24–48 hours
  • Bench-Tested - Every unit powered up and function-tested before dispatch.
  • 6-Month Warranty - From delivery, against defects in materials and workmanship.
  • 30-Day Returns - Unused items in original packaging. RMA required.
Payment Methods:
PayPal Visa and Mastercard accepted

Product Details

This 309-5710 Machine Control Module, part number 309-5710 with cross-reference 20R-2352, is a new aftermarket replacement for Caterpillar E-series and F-series hydraulic excavators from the 312E to the 390F, including the 320E, 323F, 336E, 336F and 349F, and for 336D2 and 340D2 machines.

On E-series and F-series excavators the machine controller manages the electronically controlled main pumps, the work and power modes, travel, swing and tool circuits, and the data exchange with the monitor and the engine. Each new unit is inspected for housing, seal and connector condition, powered up and function-tested on the bench, and then passed on for programming to your machine before it is packed.

  • Reference numbers: 309-5710 / 3095710, cross-referenced to 20R-2352 / 20R2352.
  • Module type: Machine controller for the excavator hydraulic and electrical system. It is not the engine-mounted ECM.
  • Fitment type: Direct replacement — same mounting position, same machine harness connectors.
  • Size range: For Caterpillar 312E and 313F small excavators up to 374F and 390F large excavators.
  • Special builds: Hybrid (336E H), XE, forestry (538–568), material handler (MH3295) and mobile hydraulic power unit versions are listed in the Fitment tab.
  • Programming: Configured to your machine by our technicians before the module leaves our facility — no flashing required after arrival.

Send Us Your Machine Serial Number (PIN) — We Program The Module Before It Ships

This one controller number serves more than seventy excavator models, and a 313F, a 336E H hybrid and a 390F each need their own machine software. We load the software for your machine at our facility and send the controller ready to install — it is not shipped blank. The 1–3 business day dispatch window starts from the moment we receive your machine data — not from the order date — so please send the following right after checkout:

  • Machine serial number (PIN) — in full, from the machine ID plate.
  • Machine model and build — for example 320E L, 336F L XE or 349F.
  • Engine serial number — from the engine data plate, if it is readable.
  • Clear photos of the label on your current controller and of the machine ID plate.

Installation note: Removal and installation should be carried out by an experienced technician. Lower the work tool to the ground, turn the battery disconnect switch off and wait for the electrical system to power down before unplugging the machine harness. Keep the connector faces clean and dry and tighten the connector fasteners to the machine service manual value.

Fitment & OEM Interchange

OEM interchange numbers are provided as a cross-reference only, to help you identify the correct replacement. All brand names, model designations and part numbers belong to their respective owners and are used solely to describe compatibility.

Reference Number Format Compatible Machine Families
309-5710 Primary number, with hyphen For Caterpillar E-series and F-series hydraulic excavators listed in the chart below
3095710 Primary number, no hyphen Same as above
20R-2352 Cross-reference number, with hyphen Same as above
20R2352 Cross-reference number, no hyphen Same as above

Application Chart — Fits for Caterpillar Excavators

Machine Category Compatible Models
Excavator 312E, 312E L, 313F, 313F L, 314E CR, 314E LCR, 315F LCR, 316E L, 316F L, 318E L, 318F L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 320F L, 323E L, 323E LN, 323E SA, 323F, 323F L, 323F SA, 324E, 324E L, 324E LN, 325F LCR, 326F L, 326F LN, 329E, 329E L, 329E LN, 329F L, 330F, 330F L, 330F LN, 335F LCR, 336D2, 336D2 GC, 336D2 L, 336D2 L XE, 336D2 LXE, 336D2 XE, 336E, 336E H, 336E L, 336E LH, 336E LN, 336E LNH, 336F, 336F L, 336F L XE, 336F LN, 336F LN XE, 336F LNXE, 336F XE, 340D2 L, 340F, 340F L, 340F L LRE, 340F L UHD, 349E, 349E L, 349E L VG, 349F, 349F L, 349F LXE, 352F, 352F XE VG, 352F-VG, 374F, 374F L, 390F, 390F L, 538, 548, 558, 568 FM, 568 FM LL
Hex Based Special Solution 320E, 330F OEM, 352F OEM
Log Loader / Forest Machine 558
Material Handler MH3295
Mobile Hydraulic Power Unit 329E, 330F, 336E, 336E HVG, 336F, 349E, 349E L HVG, 352FMHPU, 390F, C7.1

Confirm Before You Order

E-series and F-series excavators carry several electronic modules, and more than one machine controller number was used across the range. Compare the number printed on your current machine controller label with 309-5710 or 20R-2352, and tell us about any special build such as hybrid, XE or forestry. Not sure? Send us photos of the label and the machine ID plate and we will confirm fitment before you buy.

Technical Specifications

Specification Detail
Part Name Machine Control Module (excavator controller) — Electronic Control Unit
Reference Numbers 309-5710, 3095710, 20R-2352, 20R2352
Condition New (aftermarket)
Installation Method Direct replacement — fits the existing mounting position and machine harness connectors
Programming Programmed before dispatch — no flashing required after arrival
System Voltage Application dependent, confirm on data plate
Housing Material Sealed metal housing
Connectors Application dependent — confirm connector count and pin layout against your existing controller
Circuit Protection Application dependent — refer to the machine electrical schematic
Testing Bench-tested — powered up and function-tested before dispatch
Warranty 6 months from delivery, against defects in materials and workmanship
Package Contents 1 × Machine Control Module (harness, sensors and mounting hardware not included)

Compliance statement: this controller is supplied to restore factory-specified performance only. It is programmed to the configuration recorded for your machine serial number and does not alter the certified machine or engine setup.

Common Failure Symptoms

Symptom What It Usually Points To
Pump control solenoid codes on both main pumps at the same time A shared driver or supply circuit inside the machine controller, rather than two solenoids failing together.
Switching between power modes or ECO mode changes nothing The controller is not processing the mode request or not adjusting pump output.
Monitor warns that communication with the machine controller has been lost Internal data link fault in the controller, or an open link between the monitor and the controller.
Hydraulic calibrations will not complete, or are lost after the key is switched off The controller cannot store its calibration values — an internal memory fault.
Joystick thumbwheel or auxiliary tool circuit is dead while the main functions work Auxiliary output driver in the controller has failed; test the joystick and the solenoid first.
Engine speed does not follow the dial and automatic idle no longer works The controller is not reading the dial or lever inputs, or not passing the speed request to the engine.
Faults appear only after the machine has been working hard for a few hours Heat-related fault on the controller circuit board.
Several unrelated electrical faults after a jump-start or welding on the machine Voltage spike damage to the controller’s input stage.

Rule Out the Cheap Causes First

Start with supply and wiring. Check battery voltage with the key on, the controller fuses, and the cab and frame grounds. Measure the suspect pump or tool solenoid coil directly, and inspect the harness in the pump compartment and under the cab for heat damage, oil soaking and rub-through. If a software update was interrupted recently, mention it when you contact us. Replace the controller only when power, ground, harness and components have been proven good.

Shipping & Quality Guarantee

  • Bench-Tested: Every unit is powered up and function-tested before dispatch.
  • Dispatch: Dispatched in 1–3 business days, counted from the moment we receive your machine serial number (PIN) for programming.
  • Delivery: Free express shipping by DHL / FedEx / UPS, 3–8 business days. Tracking number provided within 24–48 hours of dispatch.
  • Packaging: Anti-static protection and impact-absorbing packing.
  • 6-Month Warranty: Covers defects in materials and workmanship from the date of delivery. If a fault appears in this period, we repair or replace the unit.
  • 30-Day Returns: Unused items in original packaging; an RMA number is required before sending anything back.
  • Technical Support: Fitment checks before you order and installation guidance after delivery.

Shipping & Customs Notice

Our price covers the product and shipping only. Import duties, VAT, GST and any other local taxes or customs clearance fees are not included and are the buyer’s responsibility. Please check with your local customs office before ordering.

Caterpillar® and CAT® are trademarks of their respective owner and are used here only to describe compatibility. We are an independent aftermarket parts supplier and are not affiliated with, endorsed by or sponsored by any machine or engine manufacturer.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “309-5710 20R-2352 Machine Control Module ECM for CAT 320E 323F 336E 336F 349F Excavator”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5