3684275 CM871 ECM Engine Control Module, Pre-Programmed for Cummins ISX15 ISM11 ISL9

Aftermarket ECM 3684275, Compatible with Cummins ISX15, ISM11, ISL9, ISC8.3, QSX15, QSM11.

  • Interchangeability: 3684275, 3684275NX, 3684275RX, 3684276, 701040AT
  • Application: Compatible with Cummins ISX15, ISM11, ISL9, ISC8.3, QSX15, QSM11, CM871
  • Check Your Variant: Match your existing ECM part number and engine nameplate before ordering.
  • Programmed Before Dispatch: Send your ESN and VIN after checkout — we flash it to your engine before shipping.

$1,199.00

Free Express Shipping — DHL / FedEx / UPS · 3–8 business days
Dispatched in 1–3 business days · Tracking within 24–48 hours
  • Bench-Tested - Every unit powered up and function-tested before dispatch.
  • 6-Month Warranty - From delivery, against defects in materials and workmanship.
  • 30-Day Returns - Unused items in original packaging. RMA required.
Payment Methods:
PayPal Visa and Mastercard accepted

Product Details

CM871 Engine Control Module 3684275 ECM (cross-reference 3684275NX, 3684275RX, 3684276, 701040AT) is a new aftermarket module, Compatible with Cummins ISX15, ISM11, ISL9, ISC8.3, QSX15, QSM11 and CM871 applications — programmed to your engine before it ships.

Each module is manufactured and tested to factory specifications, then powered up and function-tested before dispatch. It is intended to restore factory-specified performance to an engine whose control module has failed. Because every engine has its own calibration requirements, we program the module with your engine data before it leaves our facility.

  • Part Name: ECM / ECU Engine Control Module
  • Primary Part Number: 3684275
  • Interchange Numbers: 3684275NX, 3684275RX, 3684276, 701040AT
  • Condition: New aftermarket unit (independent replacement, not remanufactured)
  • Programming: Programmed before dispatch using your ESN and VIN
  • Warranty: 6 months from delivery, with repair or replacement service if a defect is found

Send Us Your ESN and VIN — We Program The Module Before It Ships

This module is not shipped blank. After checkout, send us your engine information and we flash the module to your engine before dispatch, so there is no programming to arrange after it arrives. Our 1–3 business day dispatch window starts from the moment we receive your engine information.

Please send after purchase:

  • Engine Serial Number (ESN)
  • Vehicle Identification Number (VIN)
  • A clear photo of the engine nameplate / data plate
  • The part number and a photo of your existing ECM

We cannot begin programming until this information is received, so dispatch is held until then.

Installation notice: Installation or removal of an engine control module should be done by an experienced technician. Disconnect battery power before connecting or disconnecting the module.

Fitment & OEM Interchange

Cummins and all other brand names are trademarks of their respective owners and are used for compatibility reference only. OEM interchange numbers are provided for cross-reference purposes only; LIUCHUANG is an independent aftermarket supplier with no affiliation with any engine manufacturer.

Part Number Reference Type Compatible Engine Series
3684275 Primary part number See Application Chart below
3684275NX Suffix variant See Application Chart below
3684275RX Suffix variant See Application Chart below
3684276 OEM interchange number See Application Chart below
701040AT OEM interchange number See Application Chart below

Application Chart

Category Compatible with Engine Models
IS-Series Engines Compatible with Cummins ISX15, ISM11, ISL9, ISC8.3
QS-Series Engines Compatible with Cummins QSX15, QSM11
ECM Platform Compatible with Cummins CM871
Not sure it fits? Check the engine nameplate and the part number on your existing ECM before ordering. If you are unsure, send us a photo of both and we will confirm fitment for you.

Technical Specifications

Part Name ECM / ECU Engine Control Module
Reference Numbers 3684275, 3684275NX, 3684275RX, 3684276, 701040AT
Condition New aftermarket
Installation Method Replaces the existing ECM; installation by an experienced technician recommended
Programming Programmed before dispatch using the ESN and VIN supplied by the buyer; no programming needed after arrival
System Voltage Application dependent, confirm on data plate
Housing Material Application dependent, confirm on data plate
Connectors Application dependent, confirm on data plate
Circuit Protection Application dependent, confirm on data plate
Testing Every unit powered up and function-tested before dispatch
Warranty 6 months from delivery, against defects in materials and workmanship
Package Contents 1 x ECM Engine Control Module (programmed), anti-static packaging

Emissions compliance: this module is intended only to restore factory-specified performance and original operating parameters. It is not designed or sold to alter, bypass or disable any emission control system.

Common Failure Symptoms

Symptom What It Usually Points To
Engine cranks but will not start No fuel command or no injector drive from the ECM, after power and sensor inputs are confirmed good
Diagnostic tool cannot connect to the engine ECM not powering up or not communicating on the data link
Check engine or stop lamp stays on with multiple unrelated fault codes Internal ECM fault, or a shared power, ground or harness problem
Engine stalls randomly, then restarts after a wait Intermittent ECM or connector fault, often heat related
Engine goes into limp mode or derates without an obvious cause Sensor circuit fault or ECM output driver problem
Gauges or tachometer behave erratically Data link errors between the ECM and the instrument cluster
Fault codes return immediately after being cleared Persistent circuit fault or an internal ECM failure
No ECM power at all Blown fuse, bad relay or open feed circuit before the ECM
Check the cheap causes first. Before replacing the ECM, verify battery voltage, ground connections, fuses, relays, harness connectors and key sensors. These account for many symptoms that look like an ECM failure.

Shipping & Quality Guarantee

  • Bench-Tested: every unit is powered up and function-tested before dispatch.
  • Dispatch: within 1–3 business days, counted from receipt of your ESN and VIN so the module can be programmed first.
  • Delivery: Express 3–8 business days via DHL, FedEx or UPS, with free shipping. Tracking number within 24–48 hours.
  • Packaging: anti-static protective packaging.
  • Warranty: 6 months from delivery, against defects in materials and workmanship.
  • Returns: 30-day returns for unused items in original packaging; RMA required.
  • Support: fast after-sales technical support for fitment and installation questions.
Shipping & Customs Notice: The price covers the product and shipping only. It does not include import duties, VAT, GST or any local taxes and clearance fees, which are the buyer’s responsibility.

Cummins and other brand names are used only to indicate compatibility and belong to their respective owners. LIUCHUANG is an independent aftermarket parts supplier with no official authorization or partnership with any engine manufacturer.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “3684275 CM871 ECM Engine Control Module, Pre-Programmed for Cummins ISX15 ISM11 ISL9”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5