416-4285 416-4285X Monitor Gauge Cluster, Temp & Fuel, for Caterpillar 305 305.5E 306E
416-4285 monitor gauge cluster for Caterpillar 305, 305.5E and 306E mini excavators.
- Interchangeability: Direct replacement for 416-4285 and 416-4285X — same dash cut-out, mounting and harness plug.
- Application: Fits for Caterpillar 305, 305.5E and 306E mini hydraulic excavators.
- Key Capability: Coolant temperature gauge and fuel level gauge in one cluster, read from the machine’s existing temperature and fuel sensors.
- Check Your Variant: Mini excavator dashes look alike across model years. Match 416-4285 on the label of your current monitor before ordering.
$1,199.00
-
Bench-Tested - Every unit powered up and function-tested before dispatch.
-
6-Month Warranty - From delivery, against defects in materials and workmanship.
-
30-Day Returns - Unused items in original packaging. RMA required.
Product Details
The 416-4285 (416-4285X) is an operator monitor gauge cluster built as a direct replacement for Caterpillar 305, 305.5E and 306E mini hydraulic excavators.
This cluster gives the operator two readings that matter most on a compact excavator: engine coolant temperature and fuel level. The temperature gauge is driven by the engine coolant temperature sensor, so the operator can spot overheating early — before a blocked radiator or slipping fan belt turns into head gasket damage. The fuel gauge reads the tank level sender, so the machine is not run dry halfway through a job. Each unit is built to factory specifications and powered up on our bench to check both gauges, the indicator lights and the backlight before it is packed.
- Part numbers: 416-4285 / 416-4285X
- Machines: 305, 305.5E and 306E mini hydraulic excavators
- Coolant temperature gauge and fuel level gauge in one cluster
- Works with the machine’s existing temperature sensor and fuel sender — no new sensors needed
- Lightweight plastic housing, same dash cut-out and harness plug as the unit removed
- Supplied in anti-static, shock-protected packaging
Installation note: Installation or removal by an experienced heavy-equipment technician is recommended. Turn the key off and disconnect the battery before unplugging the monitor, and check the plug for bent pins or moisture before fitting the new unit. After fitting, start the machine and confirm the temperature gauge rises as the engine warms up.
Fitment & OEM Interchange
Brand names and part numbers below are used for OEM cross-reference only, to identify compatibility. This is an aftermarket part and is not produced or endorsed by the machine manufacturer.
| Part Number | Search Variants | Compatible Machines |
|---|---|---|
| 416-4285 | 416-4285 / 4164285 | Compatible with Caterpillar 305, 305.5E, 306E |
| 416-4285X | 416-4285X / 4164285X | Compatible with Caterpillar 305, 305.5E, 306E |
Application Chart
| Equipment Category | Model |
|---|---|
| Mini Hydraulic Excavator | For Caterpillar 305 |
| Mini Hydraulic Excavator | For Caterpillar 305.5E |
| Mini Hydraulic Excavator | For Caterpillar 306E |
Confirm before ordering: Gauge clusters on compact excavators look alike across model years and sizes. Check that the label on the back of your current monitor reads 416-4285 or 416-4285X. If the label is missing or worn, send us your machine serial number and a photo of the nameplate and we will confirm fitment before you buy.
Technical Specifications
| Part Name | Operator Monitor, GP Gauge Cluster |
| Reference Numbers | 416-4285, 416-4285X |
| Condition | New (aftermarket) — unused, supplied in plain protective packaging |
| Installation Method | Direct replacement, dash panel mount |
| Gauges | Engine coolant temperature, fuel level |
| Programming | Not required — plug-in replacement |
| Voltage Rating | 16V — application dependent, confirm on your current monitor label |
| Housing Material | Plastic |
| Connectors | Same harness plug as the 416-4285 unit removed — application dependent, confirm against your current monitor |
| Circuit Protection | Per factory design — application dependent |
| Testing | Bench-tested — powered up and function-tested before dispatch |
| Warranty | 6 months from delivery, against defects in materials and workmanship |
| Package Contents | 1 × gauge cluster monitor (sensors, wiring harness and mounting hardware not included) |
This monitor displays readings from the machine’s existing sensors and is intended solely to restore original operating parameters. It does not change engine, emissions or machine control settings.
Common Failure Symptoms
| Symptom | What It Usually Points To |
|---|---|
| Temperature gauge stays on cold even after a long run | Failed gauge in the cluster, or an open circuit to the coolant temperature sensor |
| Temperature gauge jumps straight to hot at key-on | Shorted sensor wire to ground, or an internal fault in the gauge |
| Fuel gauge reads empty with a full tank | Failed fuel gauge, or a stuck float on the tank sender |
| Both needles bounce or drop out together | Loose plug or poor ground behind the dash, or a cracked circuit board from vibration |
| Monitor completely dead — no lights, no needles | Blown fuse or broken supply wire first; if power is present at the plug, the cluster has failed |
| Backlight out, gauges unreadable at night | Failed backlight circuit inside the cluster |
| Fogged lens or cracked plastic housing | Water entry from pressure washing or impact damage — moisture soon corrodes the board |
Rule out the cheap causes first: If only one gauge is wrong, test its sensor and wiring before blaming the cluster — a bad coolant temperature sensor or a stuck fuel sender gives the same reading as a failed gauge. If the whole monitor is dead, check the fuse, battery voltage and ground at the plug first.
Shipping & Quality Guarantee
- Bench-Tested: every unit is powered up and function-tested before dispatch.
- Fast Dispatch: dispatched in 1–3 business days.
- Free Express Shipping: DHL / FedEx / UPS, delivered in 3–8 business days, with tracking issued within 24–48 hours.
- Protective Packaging: anti-static bag and shock-absorbing carton.
- 6-Month Warranty: from delivery, against defects in materials and workmanship — repair or replacement provided.
- 30-Day Returns: unused items in original packaging, RMA required.
- Technical Support: send us a photo of your current monitor label or describe the gauge fault and our team will help confirm fitment and diagnosis.
Shipping & Customs Notice
The price covers the product and shipping only. It does not include import duties, VAT, GST or any other local taxes and customs clearance fees, which are the buyer’s responsibility.
All trademarks, brand names and part numbers are used for compatibility reference only. LIUCHUANG Parts is an independent aftermarket supplier and has no affiliation with, authorization from or endorsement by any engine or equipment manufacturer.
Reviews
Clear filtersThere are no reviews yet.