464-2924 20R-6112 Machine Control Module ECM for CAT 259D 262D 289D 299D 420F2

464-2924 Machine Control Module for CAT 259D, 262D, 289D and 299D compact loaders.

  • Interchangeability: Cross-references 464-2924, 4642924, 20R-6112, 20R6112.
  • Application: For CAT 226D–272D skid steers, 239D–299D track loaders, 257D–297D multi terrain loaders, 420F2–444F2 backhoes and D3K2–D5K2 tractors.
  • Check Your Variant: This is the machine controller, not the engine ECM — match your current module label.
  • Programmed Before Dispatch: Send your machine serial number (PIN) after checkout — we flash it to your machine before shipping.

$1,799.00

Free Express Shipping — DHL / FedEx / UPS · 3–8 business days
Dispatched in 1–3 business days · Tracking within 24–48 hours
  • Bench-Tested - Every unit powered up and function-tested before dispatch.
  • 6-Month Warranty - From delivery, against defects in materials and workmanship.
  • 30-Day Returns - Unused items in original packaging. RMA required.
Payment Methods:
PayPal Visa and Mastercard accepted

Product Details

This Machine Control Module, part number 464-2924 with cross-reference 20R-6112, is a new aftermarket replacement for Caterpillar D-series skid steer, compact track and multi terrain loaders such as the 259D, 262D, 289D and 299D, F2-series backhoe loaders and D3K2 to D5K2 track-type tractors.

On these compact machines the controller sits between the operator and the hydraulics: it reads the joysticks, the seat and armrest interlocks and the switch panel, then releases the parking brake and drives the solenoids for drive, lift, tilt, auxiliary and work tool functions. Each new unit is inspected for housing, seal and connector condition, then powered up and function-tested on the bench before it is passed on for programming to your machine.

  • Reference numbers: 464-2924 / 4642924, cross-referenced to 20R-6112 / 20R6112.
  • Module type: Machine controller for drive, implement and work tool functions. It is not the engine-mounted ECM.
  • Fitment type: Direct replacement — same mounting position, same machine harness connectors.
  • Loaders: For Caterpillar 226D–272D skid steer loaders, 239D–299D compact track loaders and 257D–297D multi terrain loaders, including D2 and D3 versions.
  • Other machines: For Caterpillar 420F2–444F2 backhoe loaders and D3K2, D4K2 and D5K2 tractors (full chart in the Fitment tab).
  • Programming: Configured to your machine by our technicians before the module leaves our facility — no flashing required after arrival.

Send Us Your Machine Serial Number (PIN) — We Program The Module Before It Ships

A 226D skid steer, a 299D3 XE track loader and a D5K2 dozer share this controller hardware but not its configuration — control pattern, flow options and work tool settings all differ. We load the configuration for your machine at our facility and send the controller ready to install; it is not shipped blank. The 1–3 business day dispatch window starts from the moment we receive your machine data — not from the order date — so please send the following right after checkout:

  • Machine serial number (PIN) — the Product Identification Number on the machine ID plate.
  • Machine model and options — for example 259D3 with high flow, or 420F2.
  • Clear photos of the label on your current controller and of the machine ID plate.

Installation note: Removal and installation should be carried out by an experienced technician. Lower the lift arms and work tool to the ground, switch off the battery disconnect or remove the battery negative cable, and wait for the electrical system to power down before unplugging the machine harness. Support a raised cab with its lock before working underneath it, keep the connector faces clean and dry, and tighten the connector fasteners to the machine service manual value.

Fitment & OEM Interchange

OEM interchange numbers are given as a cross-reference only, to help you pick the correct replacement. All brand names, model designations and part numbers belong to their respective owners and are used solely to describe compatibility.

Reference Number Format Compatible Machine Families
464-2924 Primary number, with hyphen For Caterpillar compact loaders, backhoe loaders and small track-type tractors listed in the chart below
4642924 Primary number, no hyphen Same as above
20R-6112 Cross-reference number, with hyphen Same as above
20R6112 Cross-reference number, no hyphen Same as above

Application Chart — Fits for Caterpillar Machines

Machine Category Compatible Models
Skid Steer Loader 226D, 226D3, 232D, 232D3, 236D, 236D3, 242D, 242D3, 246D, 246D3, 250, 260, 262D, 262D3, 265, 270, 270XE, 272D, 272D XHP, 272D2, 272D2 XHP, 272D3, 272D3 XE
Compact Track Loader 239D, 239D3, 249D, 249D3, 253, 255, 259D, 259D3, 265, 275, 275XE, 279D, 279D3, 285, 285XE, 289D, 289D3, 299D, 299D XHP, 299D2, 299D2 XHP, 299D3, 299D3 XE
Multi Terrain Loader 257D, 257D3, 277D, 287D, 297D, 297D XHP, 297D2, 297D2 XHP
Backhoe Loader 420F2, 427F2, 428F2, 430F2, 432F2, 434F2, 444F2
Track-Type Tractor D3K2 LGP, D3K2 XL, D4K2 LGP, D4K2 XL, D5K2 LGP, D5K2 XL
Backhoe (Work Tool) BH130
Blade GB124
Work Tool GB120

Confirm Before You Order

Compact loaders carry more than one electronic module, and the right configuration depends on the options fitted to your machine. Compare the number printed on your current machine controller label with 464-2924 or 20R-6112 before ordering. Not sure? Send us photos of the label and the machine ID plate and we will confirm fitment before you buy.

Technical Specifications

Specification Detail
Part Name Machine Control Module — Electronic Control Module (ECM)
Reference Numbers 464-2924, 4642924, 20R-6112, 20R6112
Condition New (aftermarket)
Installation Method Direct replacement — fits the existing mounting position and machine harness connectors
Programming Programmed before dispatch — no flashing required after arrival
System Voltage Application dependent, confirm on data plate
Housing Material Sealed metal housing
Connectors Application dependent — confirm connector count and pin layout against your existing controller
Circuit Protection Application dependent — refer to the machine electrical schematic
Testing Bench-tested — powered up and function-tested before dispatch
Warranty 6 months from delivery, against defects in materials and workmanship
Package Contents 1 × Machine Control Module (harness, sensors and mounting hardware not included)

Compliance statement: this controller is supplied to restore factory-specified performance only. It is programmed to the configuration recorded for your machine serial number and does not alter the certified machine or engine setup.

Common Failure Symptoms

Symptom What It Usually Points To
Engine runs but the parking brake will not release and the hydraulics stay locked An interlock input (seat, armrest or door) is missing, or the controller is not acting on it; test the interlock switches first.
Joysticks do nothing — no drive, lift or tilt — although the display is on The controller is not reading the joysticks or not driving the pilot solenoids.
Display shows a lost-communication fault for the machine controller Internal data link failure in the module, or an open data link in the cab harness.
Auxiliary or high-flow hydraulics will not switch on for an attachment Auxiliary solenoid output from the controller is dead, once the switch, solenoid and wiring test good.
Two-speed travel no longer engages Two-speed solenoid driver in the controller has failed; confirm the solenoid coil first.
Machine pulls to one side and the drive calibration will not complete The controller is not storing or applying the calibration values.
Hydraulic quick coupler switch has no effect Switch input or coupler solenoid output of the controller has failed.
Random faults after the cab was pressure-washed or the machine was jump-started Moisture in the connectors or a voltage spike has damaged the controller.

Rule Out the Cheap Causes First

On compact loaders the interlocks cause most “dead machine” calls. Check the seat switch, armrest switch and door switch, then battery voltage, the fuse panel and the cab ground. Look at the harness where the cab tilts — it is a common pinch and chafe point — and at the connectors under the seat for water. Replace the controller only when interlocks, power, ground and harness have been proven good.

Shipping & Quality Guarantee

  • Bench-Tested: Every unit is powered up and function-tested before dispatch.
  • Dispatch: Dispatched in 1–3 business days, counted from the moment we receive your machine serial number (PIN) for programming.
  • Delivery: Free express shipping by DHL / FedEx / UPS, 3–8 business days. Tracking number provided within 24–48 hours of dispatch.
  • Packaging: Anti-static protection and impact-absorbing packing.
  • 6-Month Warranty: Covers defects in materials and workmanship from the date of delivery. If a fault appears in this period, we repair or replace the unit.
  • 30-Day Returns: Unused items in original packaging; an RMA number is required before sending anything back.
  • Technical Support: Fitment checks before you order and installation guidance after delivery.

Shipping & Customs Notice

Our price covers the product and shipping only. Import duties, VAT, GST and any other local taxes or customs clearance fees are not included and are the buyer’s responsibility. Please check with your local customs office before ordering.

Caterpillar® and CAT® are trademarks of their respective owner and are used here only to describe compatibility. We are an independent aftermarket parts supplier and are not affiliated with, endorsed by or sponsored by any machine or engine manufacturer.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “464-2924 20R-6112 Machine Control Module ECM for CAT 259D 262D 289D 299D 420F2”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5