290-9479 366-8822 Machine Control Module ECM for CAT 390D 390D L 6015 RH70 374D L

290-9479 Machine Control Module for CAT 390D excavators and 6015, RH70 hydraulic shovels.

  • Interchangeability: Cross-references 290-9479, 2909479, 366-8822, 20R-2324, 30R-0057.
  • Application: For CAT 374D L (PAP, PAS, PAX, PJA), 390D (BYP, KCZ), 390D L (WAG, WAP, WBT), 6015 (DHB) and RH70 (DH5), by serial prefix.
  • Check Your Variant: The first three characters of your machine serial number decide fitment — compare them with the list above.
  • Programmed Before Dispatch: Send your machine serial number (PIN) after checkout — we flash it to your machine before shipping.

$2,540.00

Free Express Shipping — DHL / FedEx / UPS · 3–8 business days
Dispatched in 1–3 business days · Tracking within 24–48 hours
  • Bench-Tested - Every unit powered up and function-tested before dispatch.
  • 6-Month Warranty - From delivery, against defects in materials and workmanship.
  • 30-Day Returns - Unused items in original packaging. RMA required.
Payment Methods:
PayPal Visa and Mastercard accepted

Product Details

This 290-9479 Machine Control Module, part number 290-9479 with cross-references 366-8822, 20R-2324 and 30R-0057, is a new aftermarket replacement for Caterpillar 390D and 390D L mining-class excavators, 6015 and RH70 hydraulic shovels and the 374D L, fitted by serial number prefix.

Machines of this size usually work in quarries and mines, running long shifts in dust and vibration, and the machine controller is the part that keeps pumps, valves and operator inputs working together. When it fails, the whole loading tool stops. Each new unit is checked for housing, seal and connector condition, powered up and function-tested on the bench, then handed over for programming to your machine before it is packed.

  • Reference numbers: 290-9479 / 2909479.
  • Cross-reference numbers: 366-8822 / 3668822, 20R-2324 / 20R2324, 30R-0057 / 30R0057.
  • Module type: Machine controller. The engine has its own separate control module — check which one your fault points to.
  • Fitment type: Direct replacement — same mounting position, same machine harness connectors.
  • Mining and quarry machines: For Caterpillar 390D (BYP, KCZ), 390D L (WAG, WAP, WBT), 6015 (DHB), RH70 (DH5) and 374D L (PAP, PAS, PAX, PJA).
  • Programming: Configured to your machine by our technicians before the module leaves our facility — no flashing required after arrival.

Send Us Your Machine Serial Number (PIN) — We Program The Module Before It Ships

An excavator and a hydraulic shovel run different machine software on this controller, and the right version is selected by serial number. We program the controller at our facility for your machine and send it ready to install, which saves a site visit from a programming technician. It is never shipped blank. The 1–3 business day dispatch window starts from the moment we receive your machine data — not from the order date — so please send the following right after checkout:

  • Machine serial number (PIN) — in full, including the three-character prefix, from the machine ID plate.
  • Machine model — for example 390D L, 6015 or RH70.
  • Engine serial number — from the engine data plate, if it is readable.
  • Clear photos of the label on your current controller and of the machine ID plate.

Installation note: Removal and installation should be carried out by an experienced technician. Park the machine with the attachment on the ground, turn the battery disconnect switch off and wait for the electrical system to power down before unplugging the machine harness. Clean dust away from the connectors before opening them, keep the faces dry and tighten the connector fasteners to the machine service manual value.

Fitment & OEM Interchange

OEM interchange numbers are shown as a cross-reference only, so you can identify the correct replacement. All brand names, model designations and part numbers belong to their respective owners and are used solely to describe compatibility.

Reference Number Type Compatible Machine Families
290-9479 / 2909479 Primary number For Caterpillar 374D L, 390D and 390D L excavators and 6015 / RH70 hydraulic shovels, by serial prefix
366-8822 / 3668822 Cross-reference number Same as above
20R-2324 / 20R2324 Cross-reference number Same as above
30R-0057 / 30R0057 Cross-reference number Same as above

Application Chart — Fits for Caterpillar Machines by Serial Prefix

Machine Category Model Serial Number Prefix
Excavator 374D L PAP, PAS, PAX, PJA
Excavator 390D BYP, KCZ
Excavator 390D L WAG, WAP, WBT
Hydraulic Shovel 6015 DHB
Hydraulic Shovel RH70 DH5

Fitment Is Decided by Serial Number Prefix

The prefix is the first three characters of the machine serial number on the ID plate. If your prefix is in the chart above and your current controller carries 290-9479, 366-8822, 20R-2324 or 30R-0057 on its label, this is the right part. If either one does not match, send us photos of the label and the ID plate before ordering and we will check it for you.

Technical Specifications

Specification Detail
Part Name Machine Control Module (machine controller) — Electronic Control Unit
Reference Numbers 290-9479, 2909479, 366-8822, 3668822, 20R-2324, 20R2324, 30R-0057, 30R0057
Condition New (aftermarket)
Installation Method Direct replacement — fits the existing mounting position and machine harness connectors
Programming Programmed before dispatch — no flashing required after arrival
System Voltage Application dependent, confirm on data plate
Housing Material Sealed metal housing
Connectors Application dependent — confirm connector count and pin layout against your existing controller
Circuit Protection Application dependent — refer to the machine electrical schematic
Testing Bench-tested — powered up and function-tested before dispatch
Warranty 6 months from delivery, against defects in materials and workmanship
Package Contents 1 × Machine Control Module (harness, sensors and mounting hardware not included)

Compliance statement: this controller is supplied to restore factory-specified performance only. It is programmed to the configuration recorded for your machine serial number and does not alter the certified machine or engine setup.

Common Failure Symptoms

Symptom What It Usually Points To
Machine loses hydraulic response late in the shift and works again after a key cycle Heat-related fault on the controller circuit board.
Several solenoid codes appear together on unrelated circuits A shared driver or supply circuit inside the controller, rather than several solenoids failing at once.
Pressure sensor readings on several circuits go out of range at the same moment The controller’s regulated sensor supply has failed.
Hydraulic calibrations will not complete, or are lost after shutdown The controller cannot store its calibration values — an internal memory fault.
Service tool cannot reach the machine controller although the engine module answers Communication circuit in the machine controller has failed, or the data link to it is open.
A used controller from another machine fits but the machine will not work correctly Machine software does not match the serial number; the controller must be programmed for that machine.
Intermittent faults that clear when the controller connector is disturbed Dust and vibration have worn the connector pins; the controller side is often damaged too.
Travel works in one speed only Travel speed solenoid driver in the controller has failed, once the solenoid and wiring test good.

Rule Out the Cheap Causes First

In mining and quarry service, start with what dust and vibration damage first. Open the controller connectors and look for fretted pins and packed dust, check battery voltage with the key on, the controller fuses and the ground straps, and follow the machine harness for rub-through where it crosses the frame. Measure the suspect solenoid coil directly. Replace the controller only when power, ground, harness and components have been proven good.

Shipping & Quality Guarantee

  • Bench-Tested: Every unit is powered up and function-tested before dispatch.
  • Dispatch: Dispatched in 1–3 business days, counted from the moment we receive your machine serial number (PIN) for programming.
  • Delivery: Free express shipping by DHL / FedEx / UPS, 3–8 business days. Tracking number provided within 24–48 hours of dispatch.
  • Packaging: Anti-static protection and impact-absorbing packing.
  • 6-Month Warranty: Covers defects in materials and workmanship from the date of delivery. If a fault appears in this period, we repair or replace the unit.
  • 30-Day Returns: Unused items in original packaging; an RMA number is required before sending anything back.
  • Technical Support: Fitment checks before you order and installation guidance after delivery.

Shipping & Customs Notice

Our price covers the product and shipping only. Import duties, VAT, GST and any other local taxes or customs clearance fees are not included and are the buyer’s responsibility. Please check with your local customs office before ordering.

Caterpillar® and CAT® are trademarks of their respective owner and are used here only to describe compatibility. We are an independent aftermarket parts supplier and are not affiliated with, endorsed by or sponsored by any machine or engine manufacturer.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “290-9479 366-8822 Machine Control Module ECM for CAT 390D 390D L 6015 RH70 374D L”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5