60100001 VOE60100001 ECU ECM Engine Control Module, Programmable, for Volvo Penta TAD734GE
60100001 ECU ECM engine control module for Volvo Penta TAD734GE engines.
- Interchangeability: Replaces 60100001 / VOE60100001 / VOE 60100001.
- Application: For Volvo Penta TAD734GE, TAD760VE engines and Volvo EC240B, EC290B excavators.
- Programming Required: After purchase, send photos of your old ECU label, engine nameplate and chassis ID; we pre-program the unit to match your engine.
- Check Your Variant: Match the part number on your existing ECU label before ordering.
$790.00
-
Bench-Tested - Every unit powered up and function-tested before dispatch.
-
6-Month Warranty - From delivery, against defects in materials and workmanship.
-
30-Day Returns - Unused items in original packaging. RMA required.
Product Details
This new 60100001 (VOE60100001) ECU ECM engine control module is an aftermarket direct replacement for Volvo Penta TAD734GE and TAD760VE engines, and for Volvo EC240B and EC290B excavators.
The engine control unit manages fuel injection timing, engine speed governing, sensor monitoring and J1939 data communication. Each new module is manufactured and tested to match factory-specified parameters. Before dispatch, every unit is powered up on a test bench and checked for input/output channel response and communication, so it can restore original operating parameters once it is programmed for your engine.
- Condition: Brand new aftermarket unit
- Part Type: ECU / ECM engine control module (electronic control unit)
- Reference Numbers: 60100001, VOE60100001, VOE 60100001
- Installation: Direct replacement that mounts in the existing location and connects to the existing harness
- Engine Applications: For Volvo Penta TAD734GE and TAD760VE
- Machine Applications: For Volvo EC240B and EC290B excavators
- Genset Use: Can be configured to communicate over J1939 with generator controllers, including models compatible with DeepSea, ComAp and SmartGen controller setups
Programming Required – Please Send This Information After Purchase
Every engine has its own software and parameter requirements, so the ECU must be programmed to work correctly with your engine. To let us pre-program the module to match your engine, please send us:
- The part number and a clear photo of the label on your old ECU/ECM
- A photo of the engine nameplate, showing the engine model and engine serial number (ESN)
- A photo of the chassis ID / machine serial plate (for excavator applications)
- For generator sets: the make and model of your generator controller
Installation Notice: We recommend having an experienced technician install or remove the engine control module. Disconnect the battery before you unplug or connect any ECU connector, and check that the connector pins are clean and undamaged before installation.
Fitment & OEM Interchange
OEM part numbers are listed for cross-reference only. This is an aftermarket replacement part, and it is not made or endorsed by the equipment manufacturer.
| Primary Part Number | Cross-Reference Numbers | Compatible Engine Series |
|---|---|---|
| 60100001 | VOE60100001, VOE 60100001, VOE-60100001 | For Volvo Penta TAD734GE, TAD760VE |
Application Chart
| Category | Compatible Models |
|---|---|
| Industrial / Genset Engines | For Volvo Penta TAD734GE, TAD760VE |
| Excavators | For Volvo EC240B, EC290B |
Confirm Before Ordering: Compare the part number on your existing ECU label and your engine nameplate with the numbers above. If you are not sure, send us photos of both and our technical team will confirm fitment before you buy.
Technical Specifications
| Part Name | ECU ECM Controller / Electronic Control Unit / Engine Control Unit Module |
| Reference Numbers | 60100001, VOE60100001, VOE 60100001 |
| Condition | New (brand new aftermarket replacement) |
| Installation Method | Direct replacement |
| Programming | Required. We pre-program the unit using your ECU label, engine nameplate and chassis ID photos. |
| System Voltage | Application dependent, confirm on data plate |
| Housing Material | Application dependent, confirm on data plate |
| Connectors | Same layout as the replaced unit; application dependent, confirm on data plate |
| Circuit Protection | Application dependent, confirm on data plate |
| Communication | J1939 data link (genset controller and diagnostic communication) |
| Testing | Every unit is powered up and function-tested on a test bench before dispatch |
| Warranty | 6 months from delivery, covering defects in materials and workmanship (repair or replacement) |
| Package Contents | 1 × ECU ECM engine control module |
This module is designed only to restore factory-specified performance and original operating parameters. It does not alter, disable or remove any emission control function.
Common Failure Symptoms
| Symptom | What It Usually Points To |
|---|---|
| The engine cranks but will not start, even though fuel supply is normal | The ECU is not sending injector signals, or its internal power supply has failed |
| The generator controller shows “ECU communication failure” or “no J1939 data” | The ECU’s CAN/J1939 circuit has failed, or the ECU is not powering up |
| A diagnostic tool cannot connect to the engine module | The ECU has a communication or processor fault |
| The engine shuts down at random or stalls under load | An intermittent ECU fault or an unstable internal power supply |
| Several sensor fault codes appear at once, but the sensors test good | The ECU’s sensor supply voltage or input circuit has failed |
| Engine speed hunts or the generator frequency will not stay stable | A governing or speed-input fault inside the ECU |
| The excavator display shows engine ECU alarms, and the engine stays in low-idle or limp mode | The ECU has faulted internally or has corrupted software |
| The ECU case shows water damage or burn marks, or the connector pins are corroded | Physical damage to the module; replacement is usually needed |
Check the Simple Causes First: Before you replace the ECU, check battery voltage, ground straps, fuses and relays, and the wiring harness and connectors for corrosion or damage. Faults in these cheaper parts often produce the same symptoms as a failed module.
Shipping & Quality Guarantee
- Bench-Tested: Every unit is powered up and function-tested before dispatch.
- Fast Dispatch: Orders ship within 1–3 business days, and a tracking number is provided within 24–48 hours.
- Free Express Shipping: Delivered by DHL, FedEx or UPS in 3–8 business days.
- Protective Packaging: Each module ships in anti-static packaging with shock-absorbing padding.
- 6-Month Warranty: Coverage starts on the delivery date and covers defects in materials and workmanship. We will repair or replace any faulty unit.
- 30-Day Returns: Unused items in their original packaging can be returned; an RMA is required.
- Technical Support: Our team is available for fitment checks, programming information and after-sales help.
Shipping & Customs Notice
The listed price covers the product and shipping only. It does not include import duties, VAT, GST, or any other local taxes and customs clearance fees. These charges are the buyer’s responsibility.
All brand names, model names and part numbers are used for compatibility reference only. LIUCHUANG Parts is an independent aftermarket parts supplier and is not affiliated with, authorized by or endorsed by any equipment manufacturer.
Reviews
Clear filtersThere are no reviews yet.